Search
Search results
-
Board Shape
Parent page: Objects The Board Shape defines the shape of the finished board. Summary The board ...
admin - 10/14/2016 - 17:02
-
Board Shape
Parent page: Objects The Board Shape defines the shape of the finished board. Summary The board ...
admin - 09/13/2017 - 15:32
-
Preparing the Board for Design Transfer
... design from the schematic editor. This includes defining the Board Shape, configuring the drawing sheet, setting up the layers and defining any ...
admin - 09/13/2017 - 15:32
-
Preparing the Board for Design Transfer
... design from the schematic editor. This includes defining the Board Shape, configuring the drawing sheet, setting up the layers and defining any ...
admin - 08/15/2016 - 13:33
-
Creating a Custom Pad Shape
... shapes that can be created. Be customized to change the shape for each layer of the board. Have a round or slotted hole, which can be offset from the pad ...
admin - 04/08/2015 - 07:32
-
Creating a Custom Pad Shape
... shapes that can be created. Be customized to change the shape for each layer of the board. Have a round or slotted hole, which can be offset from the pad ...
admin - 09/13/2017 - 15:32
-
Redefine Board Shape
... None Summary This command is used to define a board shape if it does not already exist and redefine the shape if it does. The board ...
admin - 11/06/2013 - 09:54
-
Redefine Board Shape
... None Summary This command is used to define a board shape if it does not already exist and redefine the shape if it does. The board ...
admin - 09/13/2017 - 15:32
-
Defining Board Regions and Bending Lines
... Layer Stack Regions A Board Region is the term used to describe a user-defined area of the board that ... a single board region, the outline of this follows the board shape. If the board design requires multiple layer stacks, then the designer ...
admin - 11/29/2016 - 17:22
-
Move Board Shape
... Summary This command is used to move the board shape to another position in the current document. After launching the command, ...
admin - 11/06/2013 - 09:54