DB41 Xilinx Spartan-3AN Daughter Board

Frozen Content

Altium's Xilinx® Spartan™-3AN daughter board DB41 provides an XC3S1400AN-4FGG676C device, as well as a range of on-board memories available for use by a design running within that device.

The DB41 has the following features:

  • Xilinx Spartan-3AN FPGA (XC3S1400AN-4FGG676C)
  • On-board memories available for use by FPGA design:
     
    • 256K x 32-bit common-bus SRAM (1MByte)
    • 16M x 32-bit common-bus SDRAM (64MByte)
    • 16M x 16-bit common-bus Flash memory (32MByte)
    • Dual 256K x 16-bit independent SRAM (512KByte each)
       
  • 1-Wire® memory device used to store board ID and related information
  • Three 100-way connectors for attachment to NB2DSK01 motherboard. These connectors provide:
     
    • Interface to resources on the NB2DSK01 motherboard and plugged-in peripheral boards
    • SPI bus interface
    • I2C bus interface
    • 1-Wire bus interface
    • JTAG, power and additional control lines from the motherboard.


Figure 1. Altium's Xilinx Spartan-3AN daughter board DB41.

General Board Resources

Target FPGA Device (XC3S1400AN-4FGG676C)

Resources Accessible from an FPGA Design

The DB41 has a variety of memory resources individually wired to target daughter board FPGA I/O pins.


 

Use of the Spartan-3AN daughter board (DB41) requires the Winter 09 release of Altium Designer (or later) to be installed on your PC.

You are reporting an issue with the following selected text and/or image within the active document: