Placing a Frequency Generator Module

Frozen Content

The CLKGEN device provides a simple method for generating a signal of desired frequency in a design. Figure 1 shows an example of how the CLKGEN device is wired into a design.


Figure 2. Using the CLKGEN Frequency Generator in a design.

In the example circuit above, the Frequency Generator module takes the NanoBoard's system clock (CLK_BRD) as its time-base and produces a clock signal for the TSK165B_D microcontroller, whose frequency is some integer divisor of this reference frequency.
 

Remember that when using any virtual instrument in a design, you must ensure that the Soft Devices JTAG chain is enabled. For more information, see Enabling the Soft Devices JTAG Chain.

 

You are reporting an issue with the following selected text and/or image within the active document: