Custom Logic Tutorial - Wiring the Design
Frozen Content
With our C-coded custom logic hooked into the design, all that's left is to wire up the design.
- Go ahead and wire up the design as shown in Figure 1.
Figure 1. Final design - fully wired.
- Save the schematic and project documents.
- Compile the project to check for any errors. If there are, resolve, save and recompile.
- After compiling, you can check the hierarchy of the project in the Projects panel. The project will now recognize the C source files (
PulseGenerator.C
andAccumulator.C
) as a children of the CHC_Accumulator schematic.
Figure 2. Hierarchy with C sub-files.
That's it. Our simple accumulator design is finished. Time now to target and program the physical FPGA device with our design, so that we can see it in action!