Release Notes for Altium Designer Version 14.0
Old Content - visit altium.com/documentation
Key highlights
Support for Flex and Rigid-Flex Design
Enhanced Layer Stack Management
Support for Embedded Components
Differential Pair Routing Improvements
Via Stitching within a User-Defined Area
AutoCAD Importer/Exporter Enhancements
CadSoft EAGLE Importer
Ibis Model Implementation Editor
Supplier Support for TME
New Installation System
Altium Designer Extensions
Preferences-based Control over Vendor Tool Usage
Support for Xilinx Vivado Toolchain
Browser-based F1 Resource Documentation
Version 14.0.9
Build:30380 Date: 21 October 2013
872 | Diff Pairs now use the Diff Pair Gap Rule instead of the Clearance Rule. |
889 | When starting a Diff Pair route it now picks up the correct track widths. |
890 | The initial gathering of traces in the differential pair router has been improved. |
895 | Connection lines never get dimmed if "Show All Connections in Single Layer Mode" is on. |
924 | NanoBoard 3000 firmware update is now working correctly. |
962 | The PCB Drill Table can no longer be selected or edited when the Drill Drawing layer is hidden. |
970 | The 'L' shortcut key to change PCB routing layers is now working correctly. |
988 | The "File In Previous Format" report is no longer added to the PCB Project when opening older files. |
989 | PCB DRC Reports now display correctly when using medium sized (125%) fonts. |
990 | The PCB DRC dialog now opens correctly when using medium sized (125%) fonts. |
1002 | PCB Polygon Pour "Remove Islands Less Than" threshold no longer rounds to nearest whole number. |
1022 | PCB Polygon Pours now follow the Min conductor width settings correctly. |
1025 | IPC Footprint Wizard QFN and BGA silkscreen and sizing issues have been fixed. View BugCrunch report #2682. |
1133 | STEP Export now allows Polygon Pours to be shelved. |
1192 | ODB++ now exports Drill Pairs correctly regardless of the defined layer order. View BugCrunch report #1011. |
1207 | Film Size checks are now ignored when generating Gerber files and using the "Separate file per layer" Batch Mode option. |
1214 | A new option "Snap to Arc Centers" has been added to the PCB Board Options dialog. View BugCrunch report #1512. |
1418 | Retrieving Supply Chain information from the Part Catalog has been fixed. |
1648 | Clicking on Blog entries within the Home Page no longer opens a blank document. |
1671 | PADS Logic Importer : Fixed incorrect Port orientations. |
1767 | Schematic Library loading issues with some files have been fixed. |
1834 | Schematic Library saving issues with some files has been fixed. |