Search

Search results

  1. Counter Module

    ... Related Training Videos How do I use the Frequency Counter instrument? Figure 1. Counter module. The Counter module (FRQCNT2) provides a two-channel, three-mode ...

    admin - 11/06/2013 - 09:09

  2. Operating the Counter Module

    ... monitor signal frequencies in a design. Accessing the Counter Module's Instrument Panel The host computer is connected to the target ...

    admin - 11/06/2013 - 09:09

  3. Operating the Counter Module

    ... monitor signal frequencies in a design. Accessing the Counter Module's Instrument Panel The host computer is connected to the target ...

    admin - 09/13/2017 - 15:32

  4. Counter Module

    ... Related Training Videos How do I use the Frequency Counter instrument? Figure 1. Counter module. The Counter module (FRQCNT2) provides a two-channel, three-mode ...

    admin - 09/13/2017 - 15:32

  5. Instrument Rack - Soft Devices

    ... of the Altium Designer Documentation Library. Frequency Counter This instrument provides a two-channel, three-mode frequency ... the Altium Designer Documentation Library. Digital I/O Module A range of 1, 2 and 4-channel instruments of this type are ...

    admin - 11/06/2013 - 09:54

  6. Getting Started Tutorial - Adding Virtual Instrumentation to the Mix

    ... couple of instruments into our design: A frequency counter (FRQCNT2) – which we will use to display the output frequency from our clock division circuit. A digital IO module (DIGITAL_IO) – which we will use to display the output of the counter ...

    admin - 09/13/2017 - 15:32

  7. Getting Started Tutorial - Adding Virtual Instrumentation to the Mix

    ... couple of instruments into our design: A frequency counter (FRQCNT2) – which we will use to display the output frequency from our clock division circuit. A digital IO module (DIGITAL_IO) – which we will use to display the output of the counter ...

    admin - 01/22/2014 - 17:41

  8. Placing a Counter Module

    ... Figure 1. Using the FRQCNT2 Frequency Counter in a design. In the example circuit above, the Counter module takes the NanoBoard's system clock (CLK_BRD) as its time-base and is ...

    admin - 11/06/2013 - 09:09

  9. Placing a Counter Module

    ... Figure 1. Using the FRQCNT2 Frequency Counter in a design. In the example circuit above, the Counter module takes the NanoBoard's system clock (CLK_BRD) as its time-base and is ...

    admin - 09/13/2017 - 15:32

  10. テストとデバッグ

    ... the LAX Instrument? How do I use the Frequency Counter Instrument? How do I use the Signal Generator Instrument? ... Instrument Logic Analyzer Digital IO Module Crosspoint Switch Module Terminal Module ...

    admin - 08/23/2019 - 14:29

Pages

You are reporting an issue with the following selected text and/or image within the active document: