EMAC32 - Wishbone 32-bit Ethernet Media Access Controller
Figure 1. EMAC32 - Wishbone 32-bit Ethernet Media Access Controller.
The 32-bit Ethernet Media Access Controller component (EMAC32) is a Wishbone-compliant component providing an interface between a processor and a standard Physical Layer device (PHY) through support of the IEEE802.3 Media Independent Interface (MII).
The Controller enables write/read of the registers internal to the connected PHY device and provides a separate Wishbone Master interface for connection to external physical memory.
Supply of this soft core under the terms and conditions of the Altium End-User License Agreement does not convey nor imply any patent rights to the supplied technologies. Users are cautioned that a license may be required for any use covered by such patent rights.
Features at-a-glance
- 10/100Mbps at Full/Half Duplex
- MII compatible interface for connecting external 10/100Mbps PHY transceivers
- Ethernet/IEEE802.3 compatible
- PHY register access
- No lower limit for external (system) clock frequency (although throughput must be enough to read/write packets from/to memory)
- Wishbone-compliant
- Separate Wishbone Master interface for external memory access
Availability
From an OpenBus System document, the EMAC(32) 10-100 component can be found in the Peripherals region of the OpenBus Palette panel.
From a schematic document, the EMAC32 component can be found in the FPGA Peripherals (Wishbone) integrated library (FPGA Peripherals (Wishbone).IntLib
), located in the \Library\Fpga
folder of the installation.
Designing with the EMAC32
Use the following links to explore use of the EMAC32 in more detail: