Assembling the NanoBoard 3000

Parent article: Setting up the NanoBoard 3000

Before you can use your NanoBoard 3000, you will need to perform the following steps:

Clean the plastic surfaces (A) with the
wipe provided.
 

Peel off the self-adhesive non-slip feet (B)
from the back sheet and fix them in place on
each of the side panels (A) of the desktop stand.
 

Assemble motherboard (C) and speaker board sub-assembly (D) into
the side panels (A) by sliding and locking into place.

Attach left and right speaker leads (E).
 

Attach volume knob (F).