NanoBoard 3000 - User FPGA Power and Program LEDs

The NanoBoard 3000 provides the following two status LEDs associated with the User FPGA:

• Power LED – this will light (GREEN) when the motherboard's power is switched on. It signifies presence of the 3.3V power supply on the board.

• Program LED – this will light (YELLOW) when the User FPGA has been successfully programmed with an FPGA design.

Status LEDs for
the User FPGA.

Location on Board

The two LEDs, labeled 'PWR' (designated LED1) and 'PGM' (designated LED2) respectively, are located on the component side of the board, to the right of the Host Controller FPGA (U30).

Schematic Reference

The LEDs can be found on Sheet 34 (DB_LEDS_0603.SchDoc, entitled User FPGA Status LEDs) of the motherboard schematics.