NB2DSK01 - Host Status LEDs
Frozen Content
The Host status LEDs(labeled 'SL1'..'SL8') are used to indicate the state of the NanoTalk Controller and the various communications links that interface with it, such as Hard JTAG, Soft JTAG and SPI.
Figure 1. Host status LEDs.
Location on Board
The Host status LEDs (designated LED1 – LED8) are located on the component side of the board, to the left of the daughter board connector HDR_L1 and above the 'DAUGHTER BD TEST/RESET' button.
Schematic Reference
The Host status LED circuitry can be found on Sheet 34 (LED_RED_0603x8.SchDoc, entitled 8-Way 0603 Red LED Array) of the motherboard schematics.