Attaching the NB2DSK-SPK01 to the Desktop NanoBoard

Frozen Content

The NB2DSK-SPK01 is mounted onto the NB2DSK01 motherboard by plugging its 16-way Male connector into the motherboard's corresponding 16-way Female connector, which is located on the solder-side of the motherboard.

Figure 1. Speaker board connector on the NB2DSK01
motherboard -- the docking point for the NB2DSK-SPK01.

The NB2DSK-SPK01 is securely fixed into the NanoBoard's stand using eight 2mm diameter mounting screws. The stand is then securely attached to the NanoBoard using threaded standoffs.

Acoustic material inside the stand is used to prevent vibrational noise between the speakers and the stand itself.

You are reporting an issue with the following selected text and/or image within the active document: