Assembling the NanoBoard 3000

Frozen Content

Parent article: Setting up the NanoBoard 3000

Before you can use your NanoBoard 3000, you will need to perform the following steps:

Clean the plastic surfaces (A) with the
wipe provided.


Peel off the self-adhesive non-slip feet (B)
from the back sheet and fix them in place on
each of the side panels (A) of the desktop stand.


Assemble motherboard (C) and speaker board sub-assembly (D) into
the side panels (A) by sliding and locking into place.

Attach left and right speaker leads (E).

Attach volume knob (F).

You are reporting an issue with the following selected text and/or image within the active document: