Unconnected Wires
Old Content - visit altium.com/documentation
This compiler hint appears when a wire object is detected to be floating - not electrically connected to any part of the circuit design. The message is displayed in the Messages panel in the following format:
Unconnected line Location1 To Location2,
where
Location1 is the X,Y coordinates for the start point of the floating wire
Location2 is the X,Y coordinates for the end point of the floating wire.
Default Report Mode
Warning
Recommendation
Ensure that the offending wire object is connected into the circuit as required. If the wire is redundant, simply delete it from the design.