Multiple Harness Types On Harness
Old Content - visit altium.com/documentation
This compiler hint appears when there are multiple Harness Types defined across a Signal Harness. The message is displayed in the Messages panel in the following format:
Multiple harness types on harness
HarnessType1,
HarnessType2
where
HarnessType1 and
HarnessType2 are the multiple Harness Types specified across the Signal Harness.
Default Report Mode
Warning
Recommendation
Use the Compile Errors dialog to cross probe to the offending objects (Sheet Entries, Ports, Harness Connectors or Harness Entries) within the Signal Harness. Specify only one Harness Type across the Signal Harness.