Image

Old Content - visit altium.com/documentation

Modified by Admin on Nov 18, 2013

Parent page: Objects

A placed Image.

Summary

An image object is a non-electrical drawing primitive. It is essentially a container for an image file that can be imported and placed onto a schematic sheet. The image associated with an image object can either be linked or embedded.

Availability

Image objects are available for placement in both Schematic and Schematic Library Editors:

Schematic Editor

Choose Place » Drawing Tools » Graphic [P, D, G] from the main menus.
Click the button on the Utility Tools drop-down () of the Utilities toolbar.

Schematic Library Editor

Choose Place » Graphic [P, G] from the main menus.
Click the button on the Utility Tools drop-down () of the Utilities toolbar.

Placement

After launching the command, the cursor will change to a cross-hair and you will enter image placement mode. Placement is made by performing the following sequence of actions:

Position the cursor and click or press Enter to anchor the first corner of the image's frame, in which the image itself will reside.
Move the cursor to adjust the size of the frame and click or press Enter to complete frame placement.
The Open dialog will appear, from where you can browse to and select the required image. Select the file you wish to insert and press the Open button to complete image placement.
Continue placing further image objects, or right-click or press Esc to exit placement mode.

Additional actions that can be performed during placement – while the image's frame is still floating on the cursor, and before its first corner is anchored – are:

Press the Tab key to access an associated properties dialog, from where properties for the image can be changed on-the-fly.
Press the Alt key to constrain the direction of movement to the horizontal or vertical axis, depending on the initial direction of movement.
Press the Spacebar to rotate the image frame anti-clockwise or Shift+Spacebar for clockwise rotation. Rotation is in steps of 90°.
Press the X or Y keys to mirror the image frame along the X-axis or Y-axis respectively.

While attributes can be modified during placement (Tab to bring up associated properties dialog), bear in mind that these will become the default settings for further placement unless the Permanent option on the Schematic – Default Primitives page of the Preferences dialog is enabled. When this option is enabled, changes made will affect only the object being placed and subsequent objects placed during the same placement session.

Non-Graphical Editing...

The following methods of non-graphical editing are available:

...via an Associated Properties Dialog

This method of editing uses the following dialog to modify the properties of an image object.

The Graphic dialog.

The Graphic dialog can be accessed prior to entering placement mode, from the Schematic – Default Primitives page of the Preferences dialog. This allows the default properties for the image object to be changed, which will be applied when placing subsequent image objects.

During placement, the dialog can be accessed by pressing the Tab key.

After placement, the dialog can be accessed in one of the following ways:

Double-clicking on the placed image object.
Placing the cursor over the image object, right-clicking and choosing Properties from the context menu.

...via an Inspector Panel

An Inspector panel enables the designer to interrogate and edit the properties of one or more design objects in the active document. Used in conjunction with appropriate filtering, the panel can be used to make changes to multiple objects of the same kind, from one convenient location.

...via a List Panel

A List panel allows the designer to display design objects from one or more documents in tabular format, enabling quick inspection and modification of object attributes. Used in conjunction with appropriate filtering, it enables the display of just those objects falling under the scope of the active filter – allowing the designer to target and edit multiple design objects with greater accuracy and efficiency.

Graphical Editing

This method of editing allows you to select a placed image object directly in the workspace and change its size, shape or location, graphically.

When an image object is selected, the following editing handles are available:

A selected Image.

Click and drag A to resize the image frame in the vertical and horizontal directions simultaneously.
Click and drag B to resize the image frame in the vertical and horizontal directions separately (provided the X:Y Ratio 1:1 option in the Graphic dialog is disabled).
Click anywhere on the image – away from editing handles – and drag to reposition it. While dragging, the image can be rotated (Spacebar/Shift+Spacebar) or mirrored (X or Y keys to mirror along the X-axis or Y-axis respectively).

If attempting to graphically modify an object that has its Locked property enabled, a dialog will appear asking for confirmation to proceed with the edit. If the Protect Locked Objects option is enabled on the Schematic – Graphical Editing page of the Preferences dialog, and the Locked option for that design object is enabled as well, then that object cannot be selected or graphically edited. Double click on the locked object directly and disable the Locked property or disable the Protect Locked Objects option, to graphically edit the object.

Notes

The following image formats are supported: .bmp, .dcx, .dib, .jpg, .pcx, .png, .rle, .tif, .tga, .wmf.
To retain the image's original aspect ratio, ensure that the X:Y Ratio 1:1 option is enabled in the Graphic dialog. When this option is enabled, the image will be scaled to fit optimally into the frame size specified while maintaining the original aspect ratio of the image. If the option is disabled, the image is stretched to fit exactly into the drawn frame size.
A copy of a placed image will only be stored inside the schematic sheet if the corresponding Embedded option is enabled in the Graphic dialog. If this option is disabled, only a link to the image file will be stored. Care should be taken when using linked images – if the location of the image changes, you will need to update the link accordingly, using the FileName field in the Graphic dialog.