Off Sheet Connector
Old Content - visit altium.com/documentation
Parent page:Sch Dialogs
Summary
To specify Off Sheet Connector properties in Schematic Editor.
Access
During placement, the dialog can be accessed by pressing the Tab key.
After placement, the dialog can be accessed in the following ways:
- Double-clicking on the placed object.
- Placing the cursor over the object, right-clicking and choosing Properties from the context menu.
- Selecting the Edit » Change command, then clicking once over the placed object.
Options/Controls
Appearance
- Location X - Specify the X coordinate of the object.
- Location Y - Specify the Y coordinate of the object.
- Orientation - Specify the orientation of the object, options available are: 0 Degrees, 90 Degrees, 180 Degrees, 270 Degrees.
- Style - Specify the style of the Off Sheet Connector, Left or Right.
- Color - Click to choose a color for the object.
Properties
- Net - Assign a net name for this off sheet connector.
- Locked - If this option is checked, the Note object is protected from being edited graphically. Lock a Note whose position or size is critical. If you try to edit a design object that is locked, you will be informed that this object is locked and asked if you wish to proceed with the action. If this option is unchecked, the design object can be freely edited without confirmation.