No Erc

Parent page: Sch Dialogs

Summary

This dialog allows the designer to specify No Erc object properties in Schematic Editor.

Access

During placement, the dialog can be accessed by pressing the Tab key.

After placement, the dialog can be accessed in the following ways:

• Double-clicking on the placed object.
• Placing the cursor over the object, right-clicking and choosing Properties from the context menu.

Options/Controls

• Orientation - Specify the orientation of the object, options available are: 0 degrees, 90 degrees, 180 degrees, 270 degrees.
• Symbol - Specify a symbol for No Erc object, options available are: Thin Cross, Thick Cross, Small Cross, Check Box, Triangle.
• Color - Click the color sample to change the color of the object.
• X Location - This field shows the current X coordinate of the object. Edit the value in the field to change the position of the object directly.
• Y Location - These fields show the current X and Y coordinates of the object. Edit the values in these fields to change the position of the object directly.
• Locked - If this option is checked, the No Erc is protected from being edited graphically. Lock a No Erc whose position or size is critical. If you try to edit a design object that is locked, you will be informed that this object is locked and asked if you wish to proceed with the action. If this option is unchecked, the design object can be freely edited without confirmation.