Example Filter Apply 7

Old Content - visit altium.com/documentation

Modified by Admin on Nov 6, 2013

Applied parameters: Apply=True|Source=Example|Expr=IsWire Or IsBusEntry |Zoom=True|Select=True

Summary

Find all wires and bus entries

This command is used to apply a filter to the current document, using an underlying (and stored) query, to target just those objects that are indicated.

Availability

Right click at the SCH Editor, choose command Filter » 7 Wires and Bus Entries from the popup menu, it will immediately apply to the current document.

Details

After launching the command, a filter will be applied to the current document, using the underlying query. All design objects that fall under the scope of the filter will remain fully visible, with all other design objects becoming dimmed.

If the SCH Filter Panel is activated, the relevant Query will be typed into the panel automatically with the filter result showing.

Notes

Only those objects that fall under the scope of the filter will remain available for selection and editing. To make another object available for editing when it is dimmed, either apply a different filter that will include that object within its scope or clear the current filter, whereby all design objects in the workspace will become fully visible and available for editing.