DimensionTextHeight

Old Content - visit altium.com/documentation

Modified by Admin on May 14, 2018

Description

The child objects of these Angular Dimension, Baseline Dimension, Datum Dimension, Leader Dimension, Linear Diameter Dimension, Linear Dimension, Radial Diameter Dimension, and Radial Dimension objects are not also returned.

The DimensionTextHeight property is only defined for Angular Dimension, Baseline Dimension, Datum Dimension, Leader Dimension, Linear Diameter Dimension, Linear Dimension, Radial Diameter Dimension, and Radial Dimension objects.

Syntax

DimensionTextHeight : Number

If the target file has an 'Imperial' Measurement Unit property, the Number specifies a distance with a unit of 1 mil (1 mil = 0.001 inch).

If the target file has a 'Metric' Measurement Unit property, the Number specifies a distance with a unit of 1 mm (1 mm = 0.001 meter).

A specific option for the distance unit can be specified as follows:

AsMils(DimensionTextHeight) : Number {This specifies a distance with a unit of 1 mil.}

AsMM(DimensionTextHeight) : Number {This specifies a distance with a unit of 1 mm.}

Examples

DimensionTextHeight = 60

DimensionTextHeight >= 1.27

Returns all Angular Dimension, Baseline Dimension, Datum Dimension, Leader Dimension, Linear Diameter Dimension, Linear Dimension, Radial Diameter Dimension, and Radial Dimension objects that have a Dimension Text Height property which is greater than or equal to 1.27 current measurement units.

AsMils(DimensionTextHeight) Between 40 And 80

AsMM(DimensionTextHeight) < 1.778

Returns all Angular Dimension, Baseline Dimension, Datum Dimension, Leader Dimension, Linear Diameter Dimension, Linear Dimension, Radial Diameter Dimension, and Radial Dimension objects that have a Dimension Text Height property which is less than 1.778 mm. (The current value of the target file's Measurement Unit property has no impact upon this outcome.)