Impedance

Old Content - visit altium.com/documentation

Rule categorySignal Integrity

Rule classification: Unary

Summary

Specifies the minimum and maximum net impedance allowed. Net impedance is a function of the conductor geometry and conductivity, the surrounding dielectric material (the board base material, multi-layer insulation, solder mask, etc) and the physical geometry of the board (distance to other conductors in the z-plane).

Constraints

Default constraints for the Impedance rule.

  • Minimum (Ohms) - the value for the minimum permissible net impedance. (Default = 1.000). 
  • Maximum (Ohms) - the value for the maximum permissible net impedance. (Default = 10.00).

How Duplicate Rule Contentions are Resolved

All rules are resolved by the priority setting. The system goes through the rules from highest to lowest priority and picks the first one whose scope expression(s) match the object(s) being checked.

Rule Application

Batch DRC and during Signal Integrity analysis.

You are reporting an issue with the following selected text and/or image within the active document: