Un Route Room
Parent process: PCB:UnRoute
Applied parameters: Object = Room
Summary
This command enables you to unroute all physical connections associated with a particular room.
After launching the command, the cursor will change to a crosshair and you will be prompted to choose a room. Position the cursor over the room whose physical connections you wish to unroute and click or press ENTER.
A dialog will appear, asking whether you wish to unroute connections that extend outside of the room. If you click Yes, all track that resides in or passes into/out of the room will be removed and replaced by the logical connections. If you click No, only the pad-to-pad connections that are contained wholly inside the room will be unrouted.
Continue unrouting the physical connections associated with other rooms or right-click or press ESC to exit.
Availability
In PCB Editor, run command Tools » Un-Route » Room.
Notes
Where track passes outside of the boundaries of the room, the track is unrouted from a component pad in the room to the next destination pad along the track, outside of the room. Track on the other side of this destination pad will remain routed.
If any track is locked a confirmation dialog will appear, asking whether you want to allow the unroute for locked primitives. If you select No, then only track that is not locked will be unrouted.