Release notes for Altium Designer 10 update (10.589.22577)
Additional Resources
Updated plug-ins from release 10.577.22514 to 10.589.22577
Date: 12 July 2011
System Components: Altium Designer Base
3171 | The files now open within the library project for svndblib. View BugCrunch report #112. View BugCrunch report #156. |
5156 | The issue was fixed where variants containing non-fitted components were incorrectly affecting the drill table hole counts in pcb prints and pdfs. |
System Components: PCB System
2071 | Small necks in a polygon pour that are less than the "Remove Necks" option are now properly removed. |
3167 | Fixed polygon pour thermal relief generation to only generate thermal reliefs if the thermal relief fully connects to the main polygon pour. View BugCrunch report. |
4446 | The interactive router loop removal now removes the correct track(s) in the case of co-located SMD pads. View BugCrunch report. |
4447 | The interactive router no longer performs the "Cleaning Net xxx" at the end of the route, which resulted in slowdowns for large nets. |
4473 | The interactive router Autocomplete function no longer deletes sections of adjacent tracks and vias. |
4474 | The interactive router loop removal is now removing the correct segments when routing from an antenna that has a junction (Y connection) further back in the route. |
4544 | An issue has been resolved where the conflict resolution mode was not remembered after subsequent drag operations. View BugCrunch report. |
4783 | Improvements to the interactive router loop removal routines for reported cases where loops had not successfully been removed. |
4888 | "Restore (n) Shelved Polygons" command will now ask the user if the un-shelved polygons need to be re-poured straight away or not. View BugCrunch report. |
5088 | The Multiroute and Diff pair tools no longer appear to freeze or hang when routing close to a very large keepout arc. |
System Components: PCB Support
5125 | CAMtastic® QuickLoad command will no longer stop loading when .APR_LIB files are found in the loading directory. |
System Components: Schematic System
5169 | It is now possible to choose an alternative footprint for a vault component. |
5189 | A crash no longer occur when updating parts from a vault in certain conditions. |
System Components: Soft Design Support
2905 | Xilinx constraint file import has been improved. Drive strength and slew rate constraint from UCF files are properly imported now. |
FPGA Components: FPGA Configurable - Wishbone Memory Controller
3508 | SDRAM controller produces correct netlist for 32bit memory layout when memory size is set to 8MB. |
4376 | Missing Shared Memory Controller template for 2x16bit sram configuration is included in Altium Designer. |
Output Generators: Printer - PCB
5156 | The issue was fixed where variants containing non-fitted components were incorrectly affecting the drill table hole counts in pcb prints and pdfs. |