Search

Search results

1. Digital SimCode Reference

   ... the output pin is connected to voltage value v0 through resistance rol_param. When the output is set to a HIGH state, the output pin is connected to voltage value v1 through resistance roh_param. The low-to-high transition time is set by ttlh and the ...

   admin - 03/04/2014 - 00:51

2. NanoConnectors

   ... Current : 0.5A Maximum Contact Resistance : 40mΩ Dielectric Withstanding Voltage : 220V AC for a minimum of 60 seconds Minimum Insulation Resistance : 1GΩ Physical Characteristics Housing : ...

   admin - 01/29/2016 - 17:18

3. Fuse

   ... Template Format @DESIGNATOR %1 %2 @MODEL #|PARAMS:| ?RESISTANCE|RESISTANCE=@RESISTANCE| ?CURRENT|CURRENT=@CURRENT| Parameters (definable ...

   phil.loughhead@... - 03/04/2014 - 00:51

4. Fuse

   ... Template Format @DESIGNATOR %1 %2 @MODEL #|PARAMS:| ?RESISTANCE|RESISTANCE=@RESISTANCE| ?CURRENT|CURRENT=@CURRENT| Parameters (definable ...

   admin - 09/13/2017 - 15:32

5. Relay

   ... ?DROPOFF|DROPOFF=@DROPOFF| ?CONTACT|CONTACT=@CONTACT| ?RESISTANCE|RESISTANCE=@RESISTANCE| ?INDUCTANCE|INDUCTANCE=@INDUCTANCE| Parameters (definable at ...

   phil.loughhead@... - 03/04/2014 - 00:51

6. Relay

   ... ?DROPOFF|DROPOFF=@DROPOFF| ?CONTACT|CONTACT=@CONTACT| ?RESISTANCE|RESISTANCE=@RESISTANCE| ?INDUCTANCE|INDUCTANCE=@INDUCTANCE| Parameters (definable at ...

   admin - 09/13/2017 - 15:32

7. Resistor (Semiconductor) Model

   ... Value value for the resistance (in Ohms). Length ... RSH sheet resistance (in Ohms). DEFW ...

   phil.loughhead@... - 03/04/2014 - 00:51

8. Resistor (Semiconductor) Model

   ... Value value for the resistance (in Ohms). Length ... RSH sheet resistance (in Ohms). DEFW ...

   admin - 09/13/2017 - 15:32

9. Transfer Function Analysis

   ... analysis (DC small signal analysis) calculates the DC input resistance, DC output resistance and DC gain, at each voltage node in the circuit. Setup ...

   phil.loughhead@... - 03/04/2014 - 00:51

10. Transfer Function Analysis

    ... analysis (DC small signal analysis) calculates the DC input resistance, DC output resistance and DC gain, at each voltage node in the circuit. Setup ...

    admin - 09/13/2017 - 15:32

Pages