Automatic FPGA-PCB Linking - Choosing the Target PCB Project

After choosing the FPGA configuration, the actual target PCB project must now be defined. This is performed on the third page of the FPGA To PCB Project Wizard. By default, the Wizard will generate a new project (PCB Project1.PrjPCB), with the project file set to be stored in the same location as the FPGA project. Change the name (and/or path) for the new project as required, either directly in the PCB Project File Name field, or in the Select PCB Project File Name dialog (accessed by clicking on the field's ... button). You can also choose to use an existing PCB project.