Frozen Content
Altium's USB JTAG Adapter allows you to fully experience the benefits of LiveDesign and interact live with your chosen development board via Altium Designer.
Connecting your board
- Connect the USB JTAG Adapter to your PC using the USB cable supplied, via the USB socket (A).
- Connect the flying lead cable to the 10 pin JTAG interface header socket (B).
- Referring to the third-party development board's silkscreen or technical documentation, locate and connect the five flying leads marked
GND
,HARD_TDI
,HARD_TDO
,HARD_TCK
andHARD_TMS
to the corresponding JTAG header pins on the target board.
- Connect the four flying leads marked
SOFT_TDI
,SOFT_TDO
,SOFT_TCK
andSOFT_TMS
to any free I/O pins of the FPGA on the target board. The flying lead markedCONNECT
is floating and can remain unconnected.