Signals with Multiple Drivers
Old Content - visit altium.com/documentation
This message appears when a pin (with I/O Type Input or IO) or a sheet entry (with I/O Type Input orBidirectional) is connected to multiple driving pins or ports on the schematic sheet. The message is displayed in the Messages panel in the following format:
Signal SignalName has multiple drivers,
where
SignalName is the name of the affected signal.
Default Report Mode
Error
Recommendation
Use the Compile Errors dialog to cross probe to the affected signal pins/sheet entries. Trace the wiring from the pin/sheet entry to ensure it is connected as required, and correct if it is not.