PB02 Mass Storage Peripheral Board

Altium's Mass Storage peripheral board PB02 provides a host of Memory Card/ATA Interface resources, available for use by the FPGA device resident on the currently attached daughter board.

The PB02 has the following features:

  • Secure Digital (SD) memory card reader
  • Compact Flash (CF) memory card reader
  • Three Parallel ATA (IDE) interfaces – 1.8", 2.5" and 3.5"
  • 1-Wire® memory device used to store board ID and related information
  • 1-Wire® device socket (3-pin, 1.27mm pitch)

General Board Resources

The following linked pages detail general resources found on the PB02 and common to all peripheral boards.

Figure 1. Altium's Mass Storage peripheral board PB02.

PB02-Specific Resources

The PB02 has a variety of resources individually wired to target daughter board FPGA I/O pins. The relevant I/O and control signals are wired from the resource (via the peripheral board connector on the NB2DSK01 motherboard) to pins of the relevant daughter board connector, and ultimately on to I/O pins of the FPGA device itself.

See Also

Request Free Trial

Complete this form to request a free 15 day trial of Altium Designer: