Connecting User-Developed Boards

Frozen Content

As well as chaining multiple NanoBoards together, you can also attach your own board to the NanoBoard for inclusion into the system. Up to two user boards can be connected to each NanoBoard in the system. This enables you to extend Altium's LiveDesign methodology to the design and debugging of your production PCB!

No special control circuitry is required on a connected user board. Simply chain the JTAG ports of the compliant devices on your board – both the physical ports and the 'soft' ports established to connect with the Nexus-enabled devices inside a device (processors, virtual instruments) – and connect both chains to a 10-way header for connection to the NanoBoard.

When a user board is present, the NanoTalk Controller routes the appropriate TDO and TDI signals to form part of the overall Hard and Soft device chains for the NanoBoard. Icons for all devices on the user board will be presented in the Devices view, allowing you to interact with these devices.


Figure 1. A production PCB attached to a Desktop NanoBoard NB2DSK01.

You are reporting an issue with the following selected text and/or image within the active document: