OpenBus Tutorial - Configuring Processors, Peripherals and Memory

In our OpenBus System, we have three components that fall under this category of configuration:

• TSK3000A processor (designated MCU)

• Parallel Port Unit (designated GPIO)

• SRAM Controller (designated XRAM).

Let's configure these components now.

1. Double-click on the processor component to access the Configure (32-bit Processors) dialog. The only change we need to make is to set the Internal Processor Memory size to 32K Bytes (8K x 32-Bit Words).
    
   
   Figure 1. Configured processor.
    
2. Double-click on the parallel port unit component to access the Configure OpenBus Port I/O dialog. The only change we need to make is to set the port Kind to Input/Output.
    
   
   Figure 2. Configured parallel port unit.
    
3. Double-click on the SRAM Controller component to access the Configure (Memory Controller) dialog. The only change we need to make is to set the Size of Static RAM array field to 1 MB (256K x 32-bit).
    
   
   Figure 3. Configured SRAM Controller.